Your shopping cart is empty!
|Printing Method||Thermal transfer|
|Printing Speed||Tubes:||High speed: 40mm/sec.
Middle speed: 25mm/sec.
Low speed: 18.5mm/sec.
|Labels:||High speed: 40mm/secs.
Middle / Low speed: 25mm/secs.
|Output Rate||High speed:||About 42pcs./min.|
|Middle speed:||About 35pcs./min.|
|Low speed:||About 30pcs./min.|
|Printing 20mm tubes, 5 full-size characters, consecutive print mode, half-cutting.|
|Ink Ribbons (Exclusive cassette)||Black:||100m|
|Black for Marking Strip:||40m|
|Character Sizes||1.3mm (only full-width available), 2mm, 3mm, 6mm (full-width, half-width available for each)|
|Input Modes||Alphanumeric, symbol input|
|Display||LCD Graphic (160 x 64 dots)|
|Display Capacity||10 characters/line x 2 lines (full-width) or
20 characters/line x 2 lines (half-width) (3 lines editing is possible.)
|Built-in Memory||Print-data:||Approx. 2,500 characters|
|Files:||Approx. 15,000 characters|
|Service life of internal backup battery for data storage:||About 5 years|
|Media Cutting Method||Automatic full-cutting, Automatic half-cutting|
|Power Supply||Exclusive AC Adapter|
|Input voltage:||AC 100V - 240V 50 / 60Hz|
|PC Interface||USB2.0 Full-Speed, Exclusive PC Connection Kit (Included)|
|Operating Environment||15°C - 32.5°C (59°F - 90.5°F),
10% - 85% RH
Range is lowered to 5°C (41°F) with Tube Warmer option installed
|Storage Environment||5°C - 35°C (41°F - 95°F),
10% - 90% RH
|Dimensions (W x D x H)||250 x 300 x 85mm (9.8 x 11.8 x 3.4in.)|
|Weight||2kg (4.4lb.) (printer only)|
|Tube||PVC tube, φ 2.5 - 6.5mm, 0.5mm thick
Tube attachment option is required (Other tubes should be tested for printing.)
|Label Tape (Exclusive cassettes (White, Yellow, Silver))||Width:||6mm, 9mm, 12mm|
|Length:||30m (Silver: 27m)
Segment length can be set to 2mm through 150mm
|Wrap Around Tape: Exclusive cassettes||Print area only:||White|
|Width:||6 - 150mm (depends on cut setting)|
|Marking Strip Specified thickness||0.5mm|
|Plates of other thickness should be tested for printing|
|Width:||8mm, 8.5mm, 9mm, 9.5mm, 10mm|
|Plate Attachment option is required|
|Exclusive ribbon cassette is required|
|Manual cut only|
|Heat Shrink Tube||Shrink tube:||φ 3.0 - 6.4mm
Tube attachment option is required.
(Other tubes should be tested for printing.)
|4mm ID Strip (Exclusive Cassette (White, Yellow))||Width:||4mm|
Segment length can be set to 8mm through 150mm